OEM Guide Page

HWH SpaceMaker Equipment for CDM CONVERSIONS Vehicles

(File:  MR401070.DOC  |  Revised:  21MAR17)

 

> Printable PDF File

 

 

 

PROCEDURE:

 

1.  Locate the HWH identification tag on the SpaceMaker mechanism to get the correct mechanism part number.

 

2.  Find the correct SpaceMaker mechanism part number in the left column below.

 

3.  Refer to the listed HWH Parts Manual Page for general replacement parts information and item number arrangements.

 

4.  Note that two-cylinder mechanisms with a synchronizing cylinder have two part numbers.  One number is for the left assembly and one is for the right assembly.  If the mechanism assembly originally had one number, that number is listed with the new numbers.

 

 

 

SLIDE-OUT Mechanisms

MECHANISM

AP24702

AP24703

DUAL CYLINDER ROOM EXTENSION – 38.0” STROKE (WITH SYNCHRONIZING CYLINDER)  AP24701 KIT

SEE > MR41.2005.HTML FOR DRAWING AND PARTS INFORMATION.

 

CYLINDER ASSEMBLY___________

 

SYNCHRONIZING CYLINDER______

 

TUBE KIT____________________

 

 

ITEM 1 – RAP91196  (38.5” STROKE)

         REPLACES   AP22092

ITEM 3 – RAP90639  (15.455” STROKE)

         REPLACES   AP17498

ITEM 2 – RAP90480 – REPLACES AP13252

MECHANISM

AP24705

SINGLE CYLINDER ROOM EXTENSION – 30.0” STROKE – AP24704 KIT

SEE > MR41.1100.HTML FOR DRAWING AND PARTS INFORMATION.

 

CYLINDER ASSEMBLY___________

 

HOSE ASSEMBLIES_____________

 

 

ITEM 1 – RAP90949 (31.0” STROKE)

         REPLACES  AP28727

ITEM 3 – RAP24632 (AP24632)                 ITEM 4 – RAP53984 (AP53984)

MECHANISM

AP24707

SINGLE CYLINDER ROOM EXTENSION – 38.0” STROKE – AP24706 KIT

SEE > MR41.2011.HTML FOR DRAWING AND PARTS INFORMATION.

 

CYLINDER ASSEMBLY___________

 

TUBE KIT____________________

 

 

ITEM 1 – RAP91196  (38.5” STROKE)

         REPLACES   AP22092

ITEM 2 – RAP90480 – REPLACES AP13252